Diamond Turning Tech IV
Company: Ametek, Inc.
Location: Richmond
Posted on: May 22, 2023
Job Description:
Ametek, Inc.Working with single-point diamond turning equipment
to manufacture high precision components for the Zygo Extreme
Precision Optics Group in Richmond, CA. Zygo EPO is a leading edge
optics company working in the field of optical component and
subsystem design and manufacture to the highest tolerances and
requirements in the world. Generate a consistent flow of high
quality work through the diamond turning department. Collaborate
with supervisor and planning group to meet on-time delivery
schedules. Assist in continually improving procedures and methods
with a mind toward efficiency. -RESPONSIBILITIES -
- Set-up and operation of CNC diamond turning machines -
- Maintain and assemble diamond tools in tool holders and
positioning of tools in machine -
- Create, load, edit and store programs -
- Observe operation of machine to produce accurate and high
quality parts -
- Perform difficult and complex set-ups and operate machine on
assignments, under minimal supervision with direction from
engineering or area supervisor -
- Fabrication of precision components out of various materials
including aluminum, calcium fluoride, silicon, zinc selenide, among
others) -
- Use metrology equipment such as interferometers and
profilometers to measure results of process -
- Run software analysis routines on data to prepare machine
control programs -
- Load parts and programs onto machines and successfully execute
operations as directed -
- Handle and clean optical components without downgrading the
surfaces -
- Maintain a clean an orderly work environment by following
cleaning schedules and inventory control -
- Perform maintenance and preventatives maintenance on equipment
and tooling -
- Integrate, troubleshoot and repair complex processes -
- Perform tasks involving high precision and detail -
- Assist in developing procedures for new products including
initiating corrections and improvements -
- Assist in the development of quotations and proposals -
- Define and procure process tooling as required -
- Meet schedules and standard times and quality - -
- Assist with training of lower level technicians -
- Functions with very limited direction or supervision according
to build schedule - REQUIREMENTS -
- 7-9 years of related industry experience with an A.S. degree in
a technical discipline or a technical high school degree and 11
plus years of---technically related experience is required -
- Experience with spherical optics required, aspheres preferred
-
- Experience with optics and optical testing required -
- Experience with SPDT manufacturing equipment such as Moore
Nanotech, Precitech, etc. required -
- Experience in manufacturing environment -
- Experience with troubleshooting of complex processes -
- Team player with excellent written and verbal communication
skills -
- Ability to read and understand technical drawings and
documentation -
- Careful, well organized and detail oriented -
- Strong computer skills including MS Work and Excel -
- Strong math skills -
- Must have experience working within a multi-disciplined
manufacturing team -
- Must have excellent organizational skills -
- Must have strong interpersonal skills - PHYSICAL REQUIREMENTS:
-The physical requirements described here are representative of
those that must be met by an employee to successfully perform the
essential functions of this job. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
essential functions. - -While performing the duties of this job,
the employee is occasionally required to stand; walk; sit; use of
hands or fingers to handle, or feel objects, tools or controls and
keyboarding; reach with hands and arms; climb stairs; balance;
stoop, kneel, crouch or crawl; talk or hear. - -The employee must
occasionally lift and/or move up to 50 pounds. Specific vision
abilities required by the job include close vision, distance
vision, color vision, peripheral vision, depth perception, and the
ability to adjust focus. -WORK ENVIRONMENT: - -Work environment
characteristics described here are representative of those that
must be met by an employee to successfully perform the essential
functions of this job. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential
functions. - -While performing the duties of this job, the employee
is not exposed to weather conditions and the noise level in the
work environment is usually moderate. - -ZYGO offers competitive
salaries, a comprehensive benefit package and 401(k).--- EOE -
Working with single-point diamond turning equipment to manufacture
high precision components for the Zygo Extreme Precision Optics
Group in Richmond, CA. Zygo EPO is a leading edge optics company
working in the field of optical component and subsystem design and
manufacture to the highest tolerances and requirements in the
world. Generate a consistent flow of high quality work through the
diamond turning department. Collaborate with supervisor and
planning group to meet on-time delivery schedules. Assist in
continually improving procedures and methods with a mind toward
efficiency. -RESPONSIBILITIES -
- Set-up and operation of CNC diamond turning machines -
- Maintain and assemble diamond tools in tool holders and
positioning of tools in machine -
- Create, load, edit and store programs -
- Observe operation of machine to produce accurate and high
quality parts -
- Perform difficult and complex set-ups and operate machine on
assignments, under minimal supervision with direction from
engineering or area supervisor -
- Fabrication of precision components out of various materials
including aluminum, calcium fluoride, silicon, zinc selenide, among
others) -
- Use metrology equipment such as interferometers and
profilometers to measure results of process -
- Run software analysis routines on data to prepare machine
control programs -
- Load parts and programs onto machines and successfully execute
operations as directed -
- Handle and clean optical components without downgrading the
surfaces -
- Maintain a clean an orderly work environment by following
cleaning schedules and inventory control -
- Perform maintenance and preventatives maintenance on equipment
and tooling -
- Integrate, troubleshoot and repair complex processes -
- Perform tasks involving high precision and detail -
- Assist in developing procedures for new products including
initiating corrections and improvements -
- Assist in the development of quotations and proposals -
- Define and procure process tooling as required -
- Meet schedules and standard times and quality - -
- Assist with training of lower level technicians -
- Functions with very limited direction or supervision according
to build schedule - REQUIREMENTS -
- 7-9 years of related industry experience with an A.S. degree in
a technical discipline or a technical high school degree and 11
plus years of---technically related experience is required -
- Experience with spherical optics required, aspheres preferred
-
- Experience with optics and optical testing required -
- Experience with SPDT manufacturing equipment such as Moore
Nanotech, Precitech, etc. required -
- Experience in manufacturing environment -
- Experience with troubleshooting of complex processes -
- Team player with excellent written and verbal communication
skills -
- Ability to read and understand technical drawings and
documentation -
- Careful, well organized and detail oriented -
- Strong computer skills including MS Work and Excel -
- Strong math skills -
- Must have experience working within a multi-disciplined
manufacturing team -
- Must have excellent organizational skills -
- Must have strong interpersonal skills - PHYSICAL REQUIREMENTS:
-The physical requirements described here are representative of
those that must be met by an employee to successfully perform the
essential functions of this job. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
essential functions. - -While performing the duties of this job,
the employee is occasionally required to stand; walk; sit; use of
hands or fingers to handle, or feel objects, tools or controls and
keyboarding; reach with hands and arms; climb stairs; balance;
stoop, kneel, crouch or crawl; talk or hear. - -The employee must
occasionally lift and/or move up to 50 pounds. Specific vision
abilities required by the job include close vision, distance
vision, color vision, peripheral vision, depth perception, and the
ability to adjust focus. -WORK ENVIRONMENT: - -Work environment
characteristics described here are representative of those that
must be met by an employee to successfully perform the essential
functions of this job. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential
functions. - -While performing the duties of this job, the employee
is not exposed to weather conditions and the noise level in the
work environment is usually moderate. - -ZYGO offers competitive
salaries, a comprehensive benefit package and 401(k).--- EOE -
Keywords: Ametek, Inc., Richmond , Diamond Turning Tech IV, Other , Richmond, California
Didn't find what you're looking for? Search again!
Loading more jobs...